[ReP0]

I've been trying for the last 3 days to get this comb working under MCE2005. Driver versions are 1.1.1.1 for Nebula PCI and 1.0.63 (no remote) for tinyusb which is running off a powered hub. If it isn't obvious I'm using the bda drivers rather than nebulas native app.

Individually each tuner is working fine under MCE however when I try to use both at the same time and go through the tuning process it finds channels but when I go to view them they all return "No TV Signal" with the exception of channel nine . I'm in Sydney if that makes a difference.

It's not antenna/signal strength as I'm not changing antenna connections when I test each unit individually. All antenna connections are permanently attached the entire time to both units.

All patched up (rollup2) and out of ideas. Any help appreciated..


Thanks
ReP0

PS:
I used to have this working but with the old bda drivers nebula had (the original which didn't support resumption from sleep). If anyone still has these drivers laying around let me know and I'll pm you my email and if your inclined you can email them to me. My only guess is that the new drivers somehow don't like working with the tinyusb anymore so would like the old drivers just to test again to make sure. At least thats my theory. I couldn't locate these older drivers on nebulas site.

[HyperReality]

There is no reason I can think of why the old DigiTV BDA drivers would work but the latest ones wouldn't - the DigiTV PCI BDA drivers have absolutely nothing to do with the USB subsystem on the PC (other than the possibility of the card sharing the PCI bus with the USB controller, depending on your motherboard and which USB port you are using - though that is an O/S/hardware level thing not a DigiTV driver level thing).

On the off-chance the MCE is somehow getting confused by the different tuners, one thing you might want to try with the newer drivers is increasing the "TuneWait" setting in the DigiTV-PCI-BDA.inf file (say to 200 or higher) and reinstall the BDA drivers again. Not sure it will make any difference, but you never know... You could also try setting the BandwidthMode to 7, though I doubt this is the problem, since Ch9 is working (other than Packer having a close relationship to Microsoft, I can't think why 9 would work but nothing else would!).

Have you changed anything else since updating the DigiTV drivers? Are you using a newer/different version of the Twinhan/TinyUSB drivers?

Please send an email to our support email address, and we'll find a copy of the old drivers for you to try.